Tintenpatronennachfüllservice Unterstützen
TwitterFacebookLinkedInEmail

HP 60, 61, 74/75, 92-98, 901

NOTE: “Empty” and “Low Ink” alerts are COMPLETELY NORMAL for most HP ink cartridges which have been refilled!  While at first this may be an unusual workflow, it does allow print operations to proceed.

Following HP 60, 61, 74/75, 92-99, or 901 ink refilling, the printer cannot track the ink levels. The ink level indicator will falsely signal as empty. In many cases nuisance alert messages may also be displayed in conjunction with low ink alert messages, including ‘counterfeit cartridge’ or ‘non-genuine ink cartridge’…these are normal nuisance alerts that can just be ignored by pressing continue/dismiss/Ok. You should be able to continue with print operations until the print quality begins to fade. Nuisance (annoyance) messages include:

“Counterfeit Cartridge”, “Depleted Cartridge”, “Refilled Cartridge”, “Non-Genuine Ink Cartridge”, etc.

HP Nuisance Alert Messages

HP Alert Escalation:

Following installation of a refilled ink cartridge, you will likely observe an escalation of the cartridge alerts at the host computer (i.e. HP Solution Center software); it is suggested to just ignore the messages by either waiting until all the messages are displayed (approx. 1 minute) or by clicking ‘OK’ or ‘Dismiss’ as each alert message is displayed.

Nuisance Flowchart_HP IPH Cartridges

Alignment Page:

If the printer/software prompts you to align the cartridge, it is strongly suggested that you perform the alignment at the printer’s control panel (i.e. select ‘Ok’) instead of using the HP Solution Center software as this often fails when using refilled ink cartridges.  You may have to depress the printer’s ‘OK’ (or resume/scan/copy depending on printer model) button up to 6 times to bypass the various internal alerts to allow scanning.

HP IPH_Solution Center Alignment Workflow

NOTE: You may not ‘Cancel’ (X) the alignment  page until you press “OK” to start alignment.  You may then cancel the alignment just prior to when actual scanning occurs; printer will default to the previously stored scanned settings. If the alignment page still fails to print then the cartridge may have an internal performance issue, confirm ink cartridge’s electrical health by selecting your printer model under ‘Solve My Problem’ above. As applicable, refer to ‘Cartridge Health Diagnostics’ video.

 

Help Out Your Friends...Email this to someoneShare on FacebookTweet about this on TwitterShare on RedditShare on LinkedInShare on Google+