Low ink warnings / No printing allowed
As the electronics in the Canon ink cartridge and the printer communicate with each other, the printer may incorrectly identify an ink cartridge as empty or non-functional, and printing will not be allowed. Typically, the printer’s Power/Ink level light will be blinking or an error message may be displayed (i.e. “Ink Has Run Out”) during the error condition.
To reset the Canon 30, 31, 40 or 41 ink low alert condition (blinking ink lamps/error code) perform the following ink reset procedure:
Standard Ink Level Reset Procedure:
1) Install cartridge and start print job.
2) After first message appears, click ‘OK’ to continue. Printer should start printing.
3) If second message appears and printer’s LCD screen displays error code “E”, then DO NOT click ‘CANCEL PRINTING’.
4) Press and hold down ‘Stop’/’Reset’ button (triangle-circle icon) on your printer for 5-8 seconds until the ink low indicators turn off or printer LCD displays a “1” (select models).
Canon 30-31-40-41 Ink Cartridges – Reset Instructions:
ALTERNATIVE RESET PROCEDURES:
Support Documentation: Canon Printer Reset Methods (PDF)
Flashing Ink Indicator Lights / Error Codes Displayed:
If you still have an error condition which prohibits printing, then the ink cartridge may have internal electrical damage (micro-electronics failure); such a failure is unrelated to the ink cartridge refilling process and naturally occurs with time, use and age of ink cartridge. Typically, when the cartridge fails the problem is ‘masked’ by the ink out/empty condition so it can be difficult to distinguish between the two.
NOTE 1: A compatible, remanufactured or re-branded ink cartridge can be problematic when installed into the printer following refilling as it is usually on it’s 3rd life (or higher). Compatible cartridges are typically purchased on-line or at select retailers (i.e sold under a different label than the regular Canon cartridge packaging) and is essentially a “remanufactured cartridge” of the Canon original/genuine ink cartridge. For the best refilling experience, only use Canon original/genuine ink tanks.
NOTE 2: All cartridges being repeatedly refilled eventually do fail. Some cartridges/printers may encounter an unavoidable mechanical or electrical failure which is unrelated to refilling. Check for physical damage on the cartridge. Look at the print cartridge and see if there are any cracks, tears or missing elements. Any one of these can cause a failure. In these cases, you will need to purchase a new cartridge and start the refill process again after it has run out.
Canon 40-41 Printers (select your printer model below):
Canon FAX JX200, Canon FAX JX210P, Canon PIXMA iP1600, Canon PIXMA iP1700, Canon PIXMA iP1800, Canon PIXMA iP2500, Canon PIXMA iP2600, Canon PIXMA MP140, Canon PIXMA MP150, Canon PIXMA MP160, Canon PIXMA MP170, Canon PIXMA MP180, Canon PIXMA MP190, Canon PIXMA MP210, Canon PIXMA MP450, Canon PIXMA MP460, Canon PIXMA MP470, Canon PIXMA MX300, Canon PIXMA MX310